Cloud & Pour Point Tester
The Cloud & Pour Point Tester is designed for accurate low-temperature testing of petroleum products, lubricating oils, fuels and other applicable samples. Cloud point and pour point are important indicators of the low-temperature performance of petroleum products.
The system incorporates a mechanically refrigerated cascade cooling system with three temperature-controlled compartments. The compartments provide cooling stages of approximately 2°C, -17°C, -35°C and -51°C as specified for the respective compartments.
With four copper chambers immersed in the cooling medium in each of the three compartments, the instrument provides a total of 12 test chambers, making it suitable for petroleum, lubricant, fuel, research and quality-control laboratories.
Key Features & Benefits
- Low-Temperature Testing: Designed for cloud and pour point testing of petroleum products and related samples.
- Three Temperature-Controlled Compartments: The system incorporates three compartments for different low-temperature testing conditions.
- Wide Low-Temperature Range: Temperature conditions extend from approximately 2°C down to -51°C according to the respective compartments.
- Mechanically Refrigerated Cooling: Uses a mechanically refrigerated cascade cooling system.
- Five Compressors: Double-stage cooling system with five compressors.
- 12 Test Chambers: Four copper-immersed chambers are provided in each of the three compartments.
- CFC-Free Refrigerant: Uses CFC-free refrigerant as specified for the system.
- Dense PU Insulation: Dense polyurethane insulation helps maintain the required low-temperature conditions.
- Accuracy: Temperature accuracy specified as ±2°C.
- Readability: Temperature readability of ±0.1°C.
- Floor-Mounted Design: Robust floor-mounted construction with castor wheels for mobility.
- Front-Wheel Brakes: Two front castor wheels are provided with brakes for convenient positioning.
Technical Specifications
| Temperature Range | 2°C to -51°C (as per compartments) |
| No. of Compartments | 3 |
| Total Chambers | 12 (4 per compartment) |
| Cooling Stage | Double-stage mechanically refrigerated cooling system with five compressors |
| Refrigerant | R-134a, CFC-free |
| Heating / Cooling | Mechanically refrigerated (five compressors) |
| Accuracy | ±2°C |
| Readability | ±0.1°C |
| Insulation | Dense PU |
| Top Insulation | Polyurethane sheet with Bakelite mounting |
| Chamber Cover | PP with Bakelite knob having center hole |
| Mounting | Floor mounted |
| Mobility | Four castor wheels with brakes on two front wheels |
| Dimensions (L × W × H) | 20" × 51" × 41" (51 × 130 × 105 cm) |
| Net Weight | 285 lbs (129 kg) |
| Shipping Weight | 353 lbs (160 kg) |
| Shipping Dimensions | 52 Cu. Ft. |
Test Method
Cloud point and pour point are indicators of the lowest-temperature performance of petroleum products.
The sample is periodically examined while it is being cooled in the Cloud & Pour Point Tester. The highest temperature at which haziness is observed is reported as the cloud point.
The lowest temperature at which movement of the oil is observed is reported as the pour point.
Chamber Configuration
The instrument incorporates three separate cooling compartments designed for low-temperature testing at different temperature levels.
| Compartment | Specified Temperature | Chambers |
|---|---|---|
| 1st Compartment | 2°C | 4 |
| 2nd Compartment | -17°C | 4 |
| 3rd Compartment | -35°C | 4 |
| 4th Temperature Level | -51°C | As specified by system configuration |
The brochure describes three compartments containing four copper-immersed chambers in each compartment, giving a total of 12 chambers.
Accessories Supplied with Instrument
| Pour Point Tube | 16 Nos. |
| Bar Cork | 16 Nos. |
| Silicon Bush | 16 Nos. |
| Cork Sheet | 6 Nos. |
| Thermometer IP 1C with Calibration Certificate | 2 Nos. |
| Thermometer IP 2C with Calibration Certificate | 2 Nos. |
| Top Cover of PP | 16 Nos. |
| Fuse | 4 Nos. |
Electrical Requirement
- 220–240V: 50/60Hz, Single Phase, 15A
- 115V: 50/60Hz, Single Phase, 30A
Pre-Installation Requisite
The following requirements are specified at the buyer's scope for installation:
- IPA: 32 Ltr
- Sample: 800 ml
- Power Supply: 230V AC, 50/60 Hz, 15A
Applications
- Petroleum Laboratories: Low-temperature testing of petroleum products.
- Lubricant Testing: Cloud and pour point evaluation of lubricating oils and related products.
- Fuel Testing: Evaluation of low-temperature characteristics of applicable fuels.
- Research & Development: Laboratory research involving petroleum and related materials.
- Quality Control Laboratories: Routine cloud and pour point testing.
- Industrial Laboratories: Testing applications associated with petroleum, lubricants and fuels.
Why Choose Phoenix India Solutions
- Specialized Laboratory Solution: Phoenix India Solutions supplies laboratory equipment for petroleum, lubricant, fuel, research and quality-control applications.
- Low-Temperature Testing: The Cloud & Pour Point Tester is designed for controlled testing down to the specified low-temperature range.
- Multiple Test Chambers: Three compartments with a total of 12 chambers provide multi-sample testing capability.
- Robust Refrigeration System: Mechanically refrigerated cascade cooling with five compressors.
- Complete Laboratory Solution: Supplied with specified tubes, corks, bushes, thermometers, covers and fuses.
- Application Support: Assistance with product selection based on laboratory testing requirements.
Interested in Cloud & Pour Point Tester?
Looking for a reliable Cloud & Pour Point Tester for petroleum, lubricant and fuel testing? Phoenix India Solutions can assist with product selection and supply for research, quality-control and industrial laboratory applications.
Contact Phoenix India Solutions for technical information, pricing, availability and application requirements.