Automatic Pensky Martene Flash Point Apparatus – ASTM D93
The Automatic Pensky Martene Flash Point Apparatus is designed for automatic determination of the flash point of petroleum products, lubricating oils, fuels, solvents and other applicable flammable materials. The system is designed around ASTM D93 testing and also supports ISO 2719, IP 34 and IS 1448 (P-21) test methods.
The apparatus features a touch screen colour display with PLC control, automatic flash detection, PT-100 temperature sensing, flame-sampling mechanism, inbuilt storage memory and automatic barometric reading. Its single-action setting and automated test operation are designed to simplify routine laboratory testing.
With a temperature range of 40°C to 400°C, the instrument is suitable for petroleum, petrochemical, chemical, pharmaceutical and quality-control laboratories where flash point testing is required.
Test Method & Standards
The Pensky Martene Flash Point Apparatus is designed for flash point testing of applicable petroleum products, fuels, solvents and other flammable materials using a controlled test procedure.
The flash point is the lowest temperature at which application of an ignition source causes the vapour of a specimen to ignite under the specified test conditions. The test specimen is heated under controlled laboratory conditions, with the test flame applied at specified intervals as the sample temperature approaches the flash point.
The apparatus provides controlled flame sampling through a 10 RPM reciprocating mechanism and incorporates automatic flash detection for the test process.
Applicable Test Methods: ISO 2719, ASTM D93, IP 34 and IS 1448 (P-21).
Key Features & Benefits
- Wide Temperature Range: Test range from 40°C to 400°C.
- Multiple Test Methods: Supports ISO 2719, ASTM D93, IP 34 and IS 1448 (P-21).
- Electrical Ignition: Electrical ignitor with LPG gas arrangement.
- PT-100 Temperature Sensor: Stainless-steel PT-100 temperature sensing system.
- Automatic Flash Detection: CRC flash detector for automatic detection during the test.
- PLC Touchscreen Control: Touch screen colour display with PLC-based control and visual/audio alarm.
- Automatic Barometric Reading: Controller incorporates automatic barometric reading functionality.
- Inbuilt Storage Memory: Built-in memory for storing flash point results.
- Automatic Flame Sampling: 10 RPM flame-sampling arrangement with DC 12V or 24V gear motor.
- Vertical Reciprocating Movement: Flame-sampling mechanism provides controlled vertical movement to and fro.
- Efficient Heating: 800W heater operating at 230V.
- Single Action Setting: Sensor and temperature probe are mounted on the lid for convenient setting.
- Easy Operation: Select the test mode, enter the expected flash point, run the automatic test and view the result on the HMI.
- Rugged Design: Designed for reliable and user-friendly laboratory operation.
Technical Specifications
| Temperature Range | 40°C to 400°C |
| Test Methods | ISO 2719, ASTM D93, IP 34, IS 1448 (P-21) |
| Ignition Source | Electrical ignitor with LPG gas |
| Temperature Sensor | PT-100 in stainless steel |
| Flash Detector | CRC |
| Controller | Touch Screen, Colour Display with PLC |
| Flame-Sampling Arrangement | 10 RPM, DC 12V or 24V gear motor, vertical reciprocating movement |
| Heater | 800W, 230V |
| Electrical Ignition | Electrical ignition flame-sampling with ignition transformer, continuous output 6kV DC from 230V AC input |
| Overall Size (L × W × H) | 280 mm × 530 mm × 415 mm |
| Net Weight | 22 kg (49 lbs) |
| Electrical Requirement | 220–240V, 50/60Hz, Single Phase, 9A OR 115V, 50/60Hz, Single Phase, 8A |
| Dimension (in.) | 11 × 22 × 17 (28 × 53 × 41) |
| Shipping Weight | 78 lbs (35 kg) |
| Shipping Dimension | 4.7 Cu. ft. |
Safety Interlocks
The system incorporates automatic shutdown and buzzer indication for specified abnormal operating conditions.
- EFP reaches +30°C or 400°C
- Temperature sensor failure
- Flash detector failure
- LPG solenoid malfunction
- Stirrer not working
- Heater failure
- Side ignition coil/solenoid failure
Utility Requirements
- Power Supply: 230V AC, 16A, 50/60 Hz, Single Phase
- Gas Supply: LPG gas or natural gas
- Gas Pressure: Less than 8 kPa in case of gas firing
Accessories Supplied
- Pensky Martene Cup & Lid: 1 No.
- Thermal Printer: 1 No.
- Thermal Printer Roll: 1 No.
- PC Interface Cable: 1 No.
- Software: 1 No.
- Thermal Fuse: 1 No.
- Signal Cable: 1 No.
Applications
- Petroleum & Petrochemical Industry: Flash point testing of applicable petroleum products.
- Lubricating Oils & Greases: Testing of lubricating oils and related materials.
- Fuels & Solvents: Flash point determination for applicable fuels and solvents.
- Chemical & Pharmaceutical Industries: Laboratory testing of applicable chemical and pharmaceutical materials.
- Quality Control Laboratories: Routine flash point testing and quality-control applications.
- R&D and Academic Institutes: Research, testing and educational laboratory applications.
Why Choose Phoenix India Solutions
- Laboratory Equipment Solutions: Phoenix India Solutions supplies laboratory instruments for petroleum, chemical, pharmaceutical, research and quality-control applications.
- Application-Focused Selection: Assistance in selecting suitable laboratory equipment according to testing requirements.
- Automatic Operation: Touchscreen PLC control and automatic flash detection simplify routine testing.
- Multiple Testing Standards: Designed for testing according to ISO 2719, ASTM D93, IP 34 and IS 1448 (P-21).
- Data Storage: Inbuilt storage memory provides functionality for storing flash point results.
- Technical Support: Support for product selection, installation and application requirements.
Interested in Automatic Pensky Martene Flash Point Apparatus?
Looking for an Automatic Pensky Martene Flash Point Apparatus for ASTM D93 testing? Phoenix India Solutions can assist with product selection and supply for petroleum, petrochemical, chemical, pharmaceutical, research and quality-control laboratory applications.
Contact our team for technical information, pricing, availability and application requirements.